Serving the Greater Toronto Area & beyondEnglish · हिंदी · ગુજરાતીFor Realtors →
(437) 227-6800WhatsAppcontact@jbminspect.ca
Thermal, moisture & drone services

For leaks, cold rooms and roofs you can't easily reach

Focused diagnostic services across the GTA from a Level I Infrared Building Surveyor and Transport Canada Advanced RPAS pilot. These services do not include a complete home inspection.

Thermal & moisture services

For leaks, uncomfortable rooms and suspected insulation problems

These are focused diagnostic screening services. They do not include a complete home inspection.

ServiceCondo apartmentTownhouse / semiDetached
Single-Concern Assessment
One localized moisture/leak or cold-room/draft concern; up to 75 minutes.
$279$279$279
Winter Interior Thermal Survey$299$349$395
Combined Thermal & Moisture Assessment$399$449$499

Plus 13% HST. Condo survey prices cover up to 1,000 sq. ft.; house survey prices cover up to 2,500 sq. ft. above grade. Size adjustments apply to whole-home surveys.

Which one fits? It depends on how much of the home is involved.

  • One localized concernSingle-Concern Assessment$279Up to 75 minutes on site.
  • Several rooms or the whole homeWinter Interior Thermal Survey$299 / $349 / $395Needs suitable heating-season conditions.
  • Winter survey plus one moisture concernCombined Thermal & Moisture Assessment$399 / $449 / $499Up to 2.5 hours on site.

Where three prices are shown: condo / townhouse or semi / detached. Plus 13% HST. Wider damage or added complexity is quoted. Service prices and limits.

Water damage and mould on a wall

Focused Moisture Investigation — $279

The moisture option of our Single-Concern Assessment. The same $279 service also covers one localized cold-room or draft concern, agreed before booking.

For one defined concern or connected affected area, such as a ceiling stain, a basement dampness concern or suspected leakage around a window.

  • Up to 75 minutes on site.
  • Visual assessment of the accessible affected area.
  • Thermal imaging and moisture-meter readings where appropriate.
  • Photographs and a concise written findings report within two business days.
  • Recommended next steps, including specialist referral where needed.

Additional investigation is $125 per hour, billed in 30-minute increments, with your approval before additional work begins. Any additional reporting fee is agreed in advance.

This is non-invasive screening. It does not include opening finishes, laboratory testing, mould clearance or a guarantee that the source of a leak will be located.

Handheld thermal camera scanning a home

Winter Interior Thermal Survey

For concerns about cold rooms, drafts or suspected insulation deficiencies.

  • Systematic thermal screening of accessible interior areas.
  • Paired thermal and regular photographs where useful.
  • Documentation of relevant site conditions and limitations.
  • A prioritized list of observations and recommended next steps, with a report within two business days.

Normally available October–April, subject to suitable conditions and a heated home. Actual weather and building conditions — not the calendar alone — determine suitability.

This is a qualitative thermal assessment. It does not include a blower-door test, an EnerGuide evaluation, guaranteed energy savings or rebate eligibility certification.

Inspector checking the base of an exterior wall

Combined Thermal & Moisture Assessment

Combines the Winter Interior Thermal Survey with investigation of one defined moisture concern, during the same appointment.

  • The interior thermal survey described.
  • Focused moisture assessment of the agreed concern.
  • One integrated report within two business days.
  • Up to 2.5 hours on site for a standard-size property.

Additional concerns, unusually complex properties or extended investigation are quoted separately before work proceeds.

In short: a Focused Moisture Investigation is $279 + HST for one localized concern (up to 75 minutes on site). A Winter Interior Thermal Survey is $299–$395 + HST depending on property type, normally October–April. The Combined Thermal & Moisture Assessment is $399–$499 + HST. Standard local drone roof assessments up to two storeys are $249 (complex work quoted) and aerial thermal envelope assessments start at $395. Get an instant estimate.

Drone services

Drone roof and aerial thermal assessments

Full details, limits and flight conditions are on our drone roof and aerial thermal page.

Daytime Drone Roof Assessment — $249

Standard price for a straightforward local residential roof up to two storeys after feasibility confirmation. Complex roofs, multiple buildings or extra planning are quoted.

For accessible visual documentation of a roof's condition: one daytime visit, roof photographs and useful close-ups, written observations about visible conditions, and identification of areas that could not be assessed. Report within two business days of the flight.

Not a structural certification, leak-source guarantee or estimate of remaining roof life.

Flights depend on property permission, safe conditions, airspace requirements and suitable operating access. NAV CANADA authorization is obtained where required. We direct imaging toward the subject property and minimize incidental capture of neighbouring properties and people. For separately purchased drone services, one weather-related reschedule is included — see our drone and weather policy.

Questions

Thermal, moisture & drone FAQ

For a fuller explanation, read our guide to what thermal imaging shows in a home inspection.

What is a Single-Concern Assessment?

A $279 + HST visit for one localized leak, damp area, cold room or draft, agreed before booking, with up to 75 minutes on site and a report within two business days. The moisture option is called a Focused Moisture Investigation. It is not a whole-home survey or a complete inspection. Wider flood damage or insurance-documentation work may need a custom scope and quote.

Can a thermal camera find a leak inside a wall?

A thermal camera shows surface temperature patterns. Wet materials often appear cooler, so thermal imaging can point to areas worth checking — which we then test with a moisture meter. It cannot see inside walls, and it can't guarantee the source of a leak will be located. Our services are non-invasive and don't include opening finishes.

When is the best time for a thermal survey?

Interior thermal surveys for insulation and air leakage work best in the heating season — normally October to April — when there's a meaningful temperature difference between inside and outside. Actual weather and building conditions, not the calendar alone, determine suitability.

Is a thermal survey the same as an EnerGuide evaluation?

No. Our Winter Interior Thermal Survey is a qualitative thermal assessment. It does not include a blower-door test, an EnerGuide evaluation, guaranteed energy savings or rebate eligibility certification.

Do you need permission to fly a drone over my home?

Flights depend on property permission, safe conditions and airspace rules. Much of the GTA is controlled airspace, so we obtain NAV CANADA authorization where required. We direct imaging at the subject property and minimize capture of neighbours and people.

What happens if the weather cancels my drone assessment?

For separately purchased drone services, one weather-related reschedule is included. If we can't complete the service, you can cancel the undelivered work without a weather-cancellation fee, and any prepaid amount for undelivered work is refunded.

A cold room, a leak or a roof concern?

Tell us what you're noticing and where. We'll recommend the right focused service and confirm the scope and your total price before you book.

CallWhatsAppGet a Quote
Chat on WhatsApp